Student Verification: +91 9495684408 | Admission Helplines : +91 8078 700 700 | Admission 2024 - Apply Now | Placements 2023-24 | Library Book Search | Library Home
/Department of Electronics and Communication Engineering
Department of Electronics and Communication Engineering 2024-09-13T03:30:14+00:00

The Department, under the guidance of Dr. Arun P., Professor and Head, and with a fine blend of renowned as well as young and dynamic personalities as faculty, has always followed many innovative practices for the holistic development of the students.  The department was incepted in the year 2002 and the very first batch student brought university second rank to the college.

CourseDurationIntakeSyllabus
B.Tech in Electronics and Communication Engineering4 Years60View
M.Tech in VLSI and Embedded Systems2 Years9View
M.Tech in VLSI and Embedded Systems (Working Professionals)2 Years15View
Ph.D. in Electronics and Communication Engineering3-6 years

Develop into a center of excellence in Electronics and Communication Engineering contributing to socio-economic progress.

  • To develop and maintain adequate infrastructure for a pace-setting Electronics and Communication engineering.
  • To bring up a team of committed, proficient and research oriented electronics and communication engineering faculty.
  • To nurture students into ethical, emotionally strong and technically competent graduates to meet the dynamic challenges of the society.

CO-PO Mapping

Placement 2020

Congratulations all..

COURSES WE OFFER

B Tech Electronics and Communication Engineering (ECE)

An Engineering program which seamlessly articulates the concepts from basic sciences to technology with relevant practice through labs and projects for building the problem solving skills, keeping industry requirements in place. Students will develop competence in areas like Signal Processing, Communication systems, VLSI Design, Embedded systems and Robotics etc.

PEO – I: Graduates will have a promising professional career in the area of electronics & communication or will pursue higher education/research.

PEO – II : Graduates will provide suitable solutions to the problems in various areas of electronics and communication engineering.

PEO – III : Graduates will work successfully in collaborative and multidisciplinary teams upholding professional and ethical values.

PSO 1: Apply fundamental knowledge of Electronics and Communication Engineering in the design, analysis and development of various electronic systems

PSO 2: Use modern software and hardware tools in electronics engineering for the analysis of complex electronic systems

M.Tech in VLSI and Embedded Systems

An industrial collaborative program, aimed at circuits and systems design (both Front end & Back end) covering algorithms, Hardware description Languages, System Architectures, Physical designs, Verification techniques, Simulation & Synthesis, Low power design techniques and mixed mode design methodologies. Design and implementation of integrated circuits using industry standard tools like Cadence Spectra-Assura, Vivado, Xilinx ISE , Microwind etc. will transform the students to be industry ready.

M.Tech in VLSI Design and Embedded Systems Program, graduates will be able to:

PEO 1. Identify  and apply appropriate Electronic Design Automation (EDA)  to solve real world  problems in  VLSI and  Embedded Systems domain  to create innovative products and systems.

PEO 2. Develop managerial skill and apply appropriate approaches in the domains of VLSI design and Embedded Systems incorporating safety, sustainability and become a  successful professional or  an      Entrepreneur in the domain.

PEO 3. Pursue career in research in VLSI Design and Embedded Systems  domain  through self learning and self directed on cutting edge technologies.

M.Tech in VLSI Design and Embedded Systems Program, Graduates will be able to:

PSO 1.Acquire competency in areas of VLSI and Embedded Systems,  IC Fabrication, Design, Testing, Verification and prototype development focusing on applications.

PSO 2.Integrate multiple sub-systems to develop System On Chip, optimize its performance and excel in industry sectors related to VLSI / Embedded  domain.

PhD

The Ph.D. in Electronics and communication Engineering is a research degree which culminates in a unique dissertation that demonstrates original and creative research. The program has been designed to help the research scholars to gain an in-depth understanding of a specialized subject related to Electronics and communication. This would allow them to predict developments and make contributions in area of expertise. The research scholars pursuing the Ph.D. degree are provided with an environment and facilities that help to develop analytic and research skills to define the research problems, to study advanced knowledge base to discover innovative solutions available till date. They are also provided with opportunities to practice consultation so as to facilitate innovative change in organizations, communities, and society.

PROFESSIONAL SOCIETIES AND ASSOCIATIONS

THE INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE)

IEEE opens the door to opportunities that will help students to develop their professional identity in IEEE’s designated fields of interest: sciences, technology, engineering, and mathematics (STEM). In addition to accessing a range of membership benefits, students will make global connections with people who can help students along their targeted career path through IEEE’s international community of members and volunteers.

ECSA (Electronics and Communication Students Association)

The Department of Electronics and communication engineering has always been a Trend Setter of this Institution. Education is simply the soul of a society as it passes from one generation to another. Commemorating the quote of a famous American civil rights activist, “A word as to the education of the heart, we don’t believe that this can be imparted through books, it can only be imparted through the loving touch of the teacher”, ECSA was proposed with the objective to organize various activities aimed at drawing the goodness and best out of our own students under the guidance of the well trained faculty members of the department.

Read More…

INNOVATION CLUB

For all students in SJCET, who are interested in innovation & entrepreneurship the Innovation Club is the place to meet like-minded people with complementary skills. Here the students can get inspiration, exchange experiences, build a powerful network and form teams that work on game-changing ideas, because this club has the necessary skills and resources to support the students.

INITIATIVES BEYOND THE CLASS ROOM

Mentor System

Each faculty member in the department is assigned the complete responsibility of 30 students. This Faculty Mentor establishes a close relationship with each student, orients them to college practices, follows their progress regularly and guides them throughout the four-year course. Employment of this idea has helped several students to solve the problems they face in the academics. Also this method helps the parents to keep track of their child and their academic performance.

Remedial Education

The students with backlogs have a heavy load as they must take exams simultaneously for both the new semester’s subjects as well as for the subjects they fail; and they cannot attend classes in the subjects they have failed. Thus, they do not get any additional teaching in the subjects in which they are weak unless they resort to coaching classes or other private means. This may in turn result in cumulative failures, leading some students to take more years to complete the four-year engineering course. To help our students from such situations, remedial classes are provided by the ECE department during the month before the repeat exams, enabling the students to face the difficult papers with greater confidence and ease

Gate Coaching

The department offers evening classes for students preparing for GATE, to help them understand the GATE pattern and solve GATE papers.

SPOKEN TUTORIAL REMOTE CENTER

SJCET Palai is the resource center for promoting Spoken Tutorial Project – IIT Bombay, an initiative of National Mission through ICT, MHRD, Govt. of India. The Spoken Tutorial Project is the initiative of the ‘Talk to a Teacher’ activity of the NMEICT. SJCET Palai SPOKEN TUTORIAL REMOTE CENTER will be conducting workshops on Linux, Scilab, PHP & MySQL, Python, Java, C/C++, OpenFOAM, Blender, K-Turtle, Oscad, GIMP etc.

Placement Training

Department offers intense placement training on regular basis from third semester onwards.

LEARNING MANAGEMENT SYSTEM

Learning Management System (LMS) is designed to complement classroom instruction and engage students in online activities , assignments and discussions, examinations, wikies that allow for deeper participation inside and outside the classroom. Visit Here

NPTEL Local chapterNPTEL Local chapter

NPTEL is the largest repository of online courses in Engineering, Science & Humanities from India’s best Institutes. Students can experience class room like learning from the experts. SJCET Palai is now a Local Chapter of NPTEL. The students of SJCET can access all the courses of NPTEL even without an Internet connection. More than 350 + courses on Engineering, Science & Technology is available locally at SJCET Palai Server. The students can apply for scholarships provided by companies like Aricent. The students who pass the examination are also eligible for a certificate from reputed IIT’s.

Coursera Campus Response Initiative

Coursera’s mission is to transform lives through learning. To help minimize the impact of the coronavirus (COVID-19) outbreak on students, the Coursera community is launching a global effort to assist universities and colleges to deliver courseware online. SJCET has joined in this initiative. Now our students can access 3,800 courses and 400 Specializations in Coursera absolutely free of cost.

OUR STRENGTH

Ph.D in Electronics and Communication Engineering

The college is Research Centre of APJ Abdul Kalam Technological University (KTU).Candidates qualifying the KTU’s Entrance procedure can join for Ph.D under the approved guide in the college

Approved Guide

FACILITIES

DEPARTMENT LIBRARY

DEPARTMENT LABORATORY

ACHIEVEMENTS

Latest Faculty Publications
  1. Sreesh P.R, “Elderly Fall Detection using mmWave Radar Sensor”, International Conference on Advances in Electrical, computing, Communications and sustainable Technologies (ICAECT 2024), Shri Shankaracharya Technical Campus (SSTC), Bhilai, Chhattisgarh, India, January 2024.
  2. Arun, M. Mary Synthuja Jain Preetha and P. Careena, “Statistically significant feature-based heart murmur detection and classification using spectrogram image comparison of phonocardiogram records with machine learning techniques”, Australian Journal of Electrical and Electronics Engineering, February 2024.
  3. Arun P, Madhukumar S, Careena P, Sreesh P. R and Anto Manuel, “A Machine Learning Strategy to Detect COVID-19 by Inspecting the Statistical Significance of Standard Deviation of Sound Samples of Healthy, Covid and Post Covid Conditions”, Annual International Conference on Emerging Research Areas: International Conference on Intelligent Systems (AICERA/ICIS), Kanjirapally, India, 2023, pp. 1-6, November 2023.
  4. Anuja George and E.P.Jayakumar, “Design and implementation of hardware-efficient architecture for saturation-based image dehazing algorithm”, Journal of Real-Time Image Processing, September 2023.
  5. Anto Manuel, Jachin Bency Thomas, Rinu Mathew, Riya Jose and Albin Sebastian, “SkySentinel: Harnessing AI for Cloudburst Forecasting and Warning”, International Conference on Circuit Power and Computing Technologies ICCPCT organized by Baselios Mathews 2nd College of Engineering, Kollam, Kerala, August 2023.
  6. Rincy Merrin Varkey , Agnes Teresa Maliackal, Aiswarya Sukumaran, Jofit Cyriac, and Sonu Jose, “Machine Learning Technique To Analyze The Health Condition Of Athletes And Predict Their Performance”, International Conference on Circuit Power and Computing Technologies ICCPCT 2023 organized by Baselios Mathews 2nd College of Engineering, Kollam, Kerala, August 2023.
  7. Vijayalakshmi G, Aleena Anil, Alen Tom Vincent, Fahad Asif and Feba Francis, “Automatic Mocktail Maker”, International Conference on Circuit Power and Computing Technologies (ICCPCT), Kollam, India, pp. 1-5, August 2023.
  8. Anu Jyothi, Aswin M R, Annie G and Ananthu Anilkumar, “Design and Development of an IoT based smart plug”, International Conference on Innovation in Engineering and Technology, technically sponsored by IEEE Kerala section, organized by Ilahia College of Engineering and Technology, Muvattupuzha, Kerala, India, 1-4, July 2023.
  9. Anto Manuel, Gancis Franco Sathyaraj, Rose Chirackal Joseph, Sachin Anu Philip and Sheethal Maria Thomas, “AI-Integrated IoT-Enabled Smart Mask For SoS Alerting And Disease Prediction Based On Air Pollutants”, International Conference on Signal Processing, Computation, Electronics, Power and Telecommunication (IConSCEPT), Kararikal, India, pp. 1-7, May 2023.
  1. Anto Manuel, Madhukumar S, Bidhan Pramanick, “Design and Analysis of Glassy Carbon Material towards the Development of Biosensors for EarlyDetection of Lung Cancer”, International Conference on Electrical, Electronics, Information and Communication Technologies (ICEEICT), Trichirappalli, India, pp. 1-6, April 2023.
  2. Anu Jyothy and Anandhu Anilkumar,” 5G Technology in Power Systems”, International Journal of Scientific & Engineering Research Vol. 14, Issue 1, pp.1-5, January 2023.
  3. Ananthu Anilkumar, Aswin M R, Annie G and Anu Jyothi, “Design and Development of an IoT based smart plug”, International Conference on Innovation In Engineering and Technology, technically sponsored by IEEE Kerala section, organized by Ilahia College of Engineering and Technology, Muvattupuzha, Kerala, India, July 13-14 2023.
  4. Meekha Mathew, Sreesh P R, Madhukumar S and Arun P, “High-Performance Turbo Coder Design using MAP Algorithm and Gating Technology for Error Correction in Communication Systems”, International Research Journal of Engineering.(Accepted for publication 2023).
  5. . Elone Anne Benny, Sreesh P R, Madhukumar S and Arun P, “An Area and Power Efficient Kogge Stone Adder Using Gate Diffusion Input Logic”, International Research Journal of Engineering.(Accepted for publication 2023).
  6. F, Maria. S, Elias. K. P, Suryadeep. P, Arun. P and Anto. M, “An Electronic IV Monitoring, ceasing and alerting system”, SJCET Journal of Engineering & Management., Vol.16, pp.42-53, June 2023.
  7. Antony, A., Benny, N., Krishnan, G.G., Saju, M.M., Arun, P., George, S.L, “Design and Development of a Smart Home Management System Based on MQTT Incorporated in Mesh Network”, Springer Innovations in Communication and Computing, pp.65-74, Feb.2023.
  8. . A. George and J. E. P, “Hardware-Efficient DWT Architecture for Image Processing in Visual Sensors Networks”, IEEE Sensors Journal, vol. 23, no.5, pp. 5382-5390, March 2023.
  9. Bidhan Pramanick and Anto Manuel, “IoT-enabled biosensors for cancer and disease detection, Internet of Things in Biomedical Sciences”, IoP Publishers, April 2023.
  10. Sunil, Ben Alphin Binny, Jobin Benny, Roshan Rajeev and Anto Manuel, “Predister”, International Journal for Research Trends and Innovation, Volume 7, Issue 6, ISSN: 2456-3315, June 2022.
  11. Arun, S. Madhukumar, K.K.Vishnu, M.Neha, I. Princy and S. Ron, “Diagnostic Feasibility of Time Domain Features for Detecting and Characterizing Cry Cause Factors – An investigation”, Australian Journal of Electrical and Electronics Engineering, Taylor and Francis, Vol.19,pp. 340-348, April 2022 (SCI).
  12. Vyshnavy Prakash, Amalu Shaji, Arjun K Mohan, Wishbin Robin, Sabarinath. G , “A Study On Convolutional Neural Networks for Crop Disease Classification”, International Journal for Research Trends and Innovation, Volume 7, Issue 6, 2022.
  13. Nisha, J. S., Varun P. Gopi, and P. Palanisamy” Automated Colorectal Polyp Detection Based on Image Enhancement and Dual-Path CNN Architecture”, Elsevier Journal of Biomedical Signal Processing & Control, 73, pp. 103465, 2022(SCI).
  14. Nisha, J. S., Varun P. Gopi, and P. Palanisamy, “Classification of Informative Frames in Colonoscopy Video Based on Image Enhancement and PHOG Feature Extraction”, Journal of Biomedical Engineering: Applications, Basis and Communications, pp. 2250015, 2022(SCI)
  15. Nisha, J. S., Varun P. Gopi, and P. Palanisamy, “Colorectal Polyp Detection Using Image Enhancement and Scaled YoloV4 Algorithm” , Journal of Biomedical Engineering: Applications, Basis and Communications. (In press.)
  16. Nisha, J. S., Varun P. Gopi, and P. Palanisamy, “Colorectal Polyp Detection in Colonoscopy Videos using Image Enhancement and Discrete Orthonormal Stockwell Transform”, Biomedical Signal Processing and Control (Under review)
  17. . Nisha, J. S., Varun P. Gopi, and P. Palanisamy, “Directed Acyclic Graph-CNN Architecture for Colorectal Polyp Detection”, Elsevier Journal of Biomedical Signal Processing & Control. (In press.)
  18. Tomson Devis and Manju Manuel, “Design and Implementation of a Smart Cost-Effective Hearing Aid using Fractional Interpolated Filters.” Journal of Information Science & Engineering 38.2 (2022): 397-412 (SCIE).
  19. Tomson Devis and Manju Manuel, “Hardware-efficient auto-reconfigurable hearing aids using 3-level octave interpolated filters for auditory compensation applications.” Physical and Engineering Sciences in Medicine 44.3 (2021): 785-798 (SCIE).
  20. Careena P., Mary Synthuja Jain Preetha M and P. Arun, “Statistical Significance of Wilson Amplitude Towards the Identification and Classification of Murmur from Phonocardiogram”, Lecture Notes on Data Engineering and Communication Technologies, Springer, November 2021(Scopus Indexed).
  21. Nisha, J. S., Varun P. Gopi, and P. Palanisamy, ” Automated Polyp Detection in Colonoscopy Videos Using Image Enhancement and Saliency Detection Algorithm”, Journal of Biomedical Engineering: Applications, Basis and Communications, pp. 2250001, 2021(SCI).
  22. . G. Sabarinath., J. Manu, Shone Sunny, P. Prince, Nithin Jose and Melvin Kurian , “Design of Life Detection System for Survivor Tracking in Debris”, in Journal of Chengdu University of Technology (Science and Technology Edition), vol. 26, no. 8, Aug. 2021.(Scopus Indexed)
  23. Deepa Abraham and Manju M, Implementation of Sparse Ramanujan Sequence (SRS) based transforms in FPGA, IEEE 2021 International Conference on Communication, Control and Information Sciences (ICCISc-2021)
  24. . Deepa Abraham and Manju M, Design of transmultiplexer filter banks using ramanujan sums,National Academy Science Letters,Vol.44,pp.33-38.2021(SCIE).
  25. Vipin, N. F. Giji, A. Ramesh, M. Meera,, M. K. Nath and V. Sreejith, “Detection of Melanoma using Deep Learning Techniques: A Review,” 2021 International Conference on Communication, Control and Information Sciences (ICCISc), 2021, pp. 1-8 (Scopus Indexed)
  26. Arun, N. Prajith, C. Melvin, S.N. Sreejith and S. Sandesh, “Design and development of an IoT based intelligent multi parameter screening system”, Materials Today: Proceedings, Elsevier, December 2021(Scopus Indexed).
  27. P.R and Amina M K, “Design and Implementation of UART AI on FPGA”,Materials Today: Proceedings, Elsevier, December 2021(Scopus Indexed).
  28. Shilpa L.G and Vrinda S V,”Design and Implementation of FAST RBSD Multiplier, “Materials Today: Proceedings, Elsevier, December 2021(Scopus Indexed).
  29. Jacob Thomas, Akhil S Nair, Alan Sigi, Amrutha Karthikeyan and Devanarayanan V, “IoT based Baby Incubator”, International Research Journal of Engineering and Technology, Vol.6, pp.1-9, June 2021. (Scopus Indexed).
  30. Juney M G., Aishwarya A, Jyothi B, Anjani S and Donymon J, “Braille based communication gloves”, Journal of Emerging Technologies and Innovative Research, Vol.8, pp 16-24, June 2021.
  31. Chittilappilly, J. Giby and K. Subramaniam, “Efficient Detection of Sheet Metal Defect Using KNN”, Journal of Green Engineering, Volume 10, Issue 10, pages 9670-9680, October 2020 (Scopus indexed).
  32. P R Sreesh, L S Kumar, “Performance analysis of FIR Filters” Proceedings of 2020 Third International Conference on Advances in Electronics, Computers and Communications (ICAECC), IEEE Conference Record# 50550, Pages 1-6, DOI: 10.1109/ICAECC50550.2020.9339519 (Scopus indexed)
  33. . Tomson Devis and Manju Manuel, “Design and Implementation of a Smart Cost-effective Hearing Aid using Fractional Interpolated Filters”, Journal of Information Science and Engineering, 2020. (SCI indexed, accepted)
  34. Vinitha George E and V P Devassia, “Drum Signal Separation from polyphonic music signal using Non negative Matrix Factorization”, National Conference on Communication Systems (NCOCS), NIT, Puthuchery, pp.21-22, Sep. 2019
  35. Jacob J., Sudheep Elayidom M., Devassia V.P. (2021) “An Innovative Approach for Aerial Video Surveillance Using Video Content Analysis and Indexing”. In: Chen JZ., Tavares J., Shakya S., Iliyasu A. (eds) Image Processing and Capsule Networks. ICIPCN 2020. Advances in Intelligent Systems and Computing, vol 1200. Springer, Cham. https://doi.org/10.1007/978-3-030-51859-2_52
  36. Jacob, J., Elayidom, M., & Devassia, V.P. (2020). “An innovative Method of Accessing Digital Video Archives through Video Indexing”, 2020 5th International Conference on Communication and Electronics Systems (ICCES), 984-988.
  37. Jaimon Jacob, M.Sudheep Elayidom, P. Devassia, “Video content analysis and retrieval system using video storytelling and indexing techniques”, International Journal of Electrical and Computer Engineering-IJECE, Vol. 10, No. 6, 6019-6025, ISSN: 2088-8708.
  38. Anuja George, “DESIGN OF LOW POWER HIGH-SPEED SAR ADC-A REVIEW” in Proceedings of the Third International Conference on Computing Methodologies and Communication (ICCMC 2019) IEEE Xplore Part Number: CFP19K25-ART; ISBN: 978-1-5386-7808-4.
  39. Careena P., Mary Synthuja Jain Preetha M and P. Arun, “Waveform Length Based Reliability Analysis for the Detection of Murmur from PCG Records”, Emerging Technologies for Sustainability, Vol 35. Taylor & Francis, London, July 2020.
  40. Sabrinath, Sreeharitha and Babita R. Jose, “Compressive Sensing Recovery Algorithms and Applications- A Survey”, IOP Conference Series: Materials Science and Engineering, volume 396,1,012045,2018.
  41. . Mr. G. Sabrinath, Asst. Professor, department of ECE and Babita R. Jose, “A Noise Reduced Hard Thresholding method for Noisy Sparse Reconstruction”, IOP Conference Series: Materials Science and Engineering, volume 396, 1,012037, 2018
  42. Careena P., Mary Synthuja Jain Preetha M and P. Arun, “Effectiveness of Wilson Amplitude for the Detection of Murmur from the PCG Records”, Lecture Notes in Electrical Engineering, Vol 656. Springer, Singapore, June 2020.
  43. Careena P., Mary Synthuja Jain Preetha M and P.Arun, “Significance of Frequency Domain Features of PCG Records for Murmur Detection – An Investigation”, Biomedical and Pharmacology Journal , Vol.13,June 2020.
  44. Arun, S. Abraham Lincon and N. Prabhakaran, “An Automated Method for the Analysis of Bearing Vibration Based on Spectrogram Pattern Matching”. Journal of Applied Research and Technology, Vol.17, pp.126-136, Oct.2019
  45. Arun et al., “An Investigation on the Effectiveness of Wilson Amplitude for the Detection of chisel Wear in Twist Drill Bit”, SJCET Journal of Engineering & Management., Vol.12, pp.2-7, June 2019
  46. . Arun and B. Basheer, “Statistical Analysis and Evaluation of Non-Stationary Signal Using Temporal Features & Design and Simulation of Vibroarthrographic Siganl Recorder”, SJCET Journal of Engineering & Management., Vol.12, pp.34-42, June 2019
  47. Careena P., Mary Synthuja Jain Preetha M and P. Arun, “Detection of Murmur from Time Domain Features of Heart Sounds – an Investigation”, Int. J. of Recent Tech. and Eng., Vol. 8, pp.716-23, June 2019
  48. Careena P., Mary Synthuja Jain Preetha M and P.Arun, “Detection of Murmur from Non-Stationarity of Heart Sounds”. Biomedical and Pharmacology Journal, Vol.12, pp.947-959, June 2019
  49. Sabarinath et. al., “An Investigation on the Effectiveness of Wilson Amplitude for the Detection of chisel Wear in Twist Drill Bit”, SJCET Journal of Engineering & Management., Vol.12, pp.2-7, June 2019
  50. Ms Soya Tresa James & Ms Rose Maria Joji presented a paper titled “Design Study of N Bit Asynchonous Binary Search Analog to Digital Converter” at the 3rd International Conference on Computing Methodologies and Communications organized by Surya Engineering College during 27-29 March 2019 .
  51. Ms Sunitha S Pillai & Mr Manu Mohan presented a paper titled “Review on LFSR on Low Power BIST ” at the 3rd International Conference on Computing Methodologies and Communications organized by Surya Engineering College during 27-29 March 2019 .
  52. . Dr. George Tom Varghese & Ms Litty Chacko presented a paper titled “Comparator Design for Low Power High Speed Flash ADC- A Review” at the 3rd International Conference on Computing Methodologies and Communications organized by Surya Engineering College during 27-29 March 2019
  53. Ms Anuja George & Ms Devitha P S presented a paper titled “DESIGN OF LOW POWER HIGH – SPEED SAR ADC – A REVIEW” at the 3rd International Conference on Computing Methodologies and Communications organized by Surya Engineering College during 27-29 March 2019 .
  54. Ms Rincy Merrin Varkey & Ms Beema Basheer presented a paper titled “Review on Various Full Adder Circuits” at the 3rd International Conference on Computing Methodologies and Communications organized by Surya Engineering College during 27-29 March 2019 .
Publications by Students
  • Sachin Joshy, Arya Sara Alex, Arjun T S, Thejas Krishna and Sunitha S Pillai, “Rainwater Monitoring System”, International conference on Signal Processing, Instrumentation & Communication Engineering (SPICE 2K24) organized by Department of Electronics & Communication Engineering, MBITS in association with Bureau of Indian Standards(BIS) on 9th & 10th February 2024
  • Aleena Anil, Alen Tom Vincent, Fahad Asif, Feba Francis and Vijayalakshmi G, “Automatic Mocktail Maker”, International Conference on Circuit Power and Computing Technologies (ICCPCT), Kollam, India, pp. 1-5, August 2023.
  • Gancis Franco Sathyaraj, Rose Chirackal Joseph, Sachin Anu Philip, Sheethal Maria Thomas and Anto Manuel, “AI-Integrated IoT-Enabled Smart Mask For SoS Alerting And Disease Prediction Based On Air Pollutants”, International Conference on Signal Processing, Computation, Electronics, Power and Telecommunication (IConSCEPT), Kararikal, India, pp. 1-7, May 2023.
  • Anandhu Anilkumar and Anu Jyothy,” 5G Technology in Power Systems”, International Journal of Scientific & Engineering Research Vol. 14, Issue 1, pp.1-5, January 2023.
  • Agnes Teresa Maliackal, Aiswarya Sukumaran, Jofit Cyriac, Sonu Jose and Rincy M V , Machine Learning Technique To Analyze The Health Condition Of Athletes And Predict Their Performance”, International Conference on Circuit Power and Computing Technologies ICCPCT 2023 organized by Baselios Mathews 2nd College of Engineering, Kollam Kerala on 10-11th August 2023(Accepted for presentation).
  • Albin Sebastian, Jachin Bency Thomas, Rinu Mathew, Riya Jose and Anto M, “SkySentinel”, International Conference on Circuit Power and Computing Technologies ICCPCT 2023 organized by Baselios Mathews 2nd College of Engineering, Kollam Kerala on 10-11th August 2023(Accepted for presentation).
  • Akshay A, Meenakshy Pramod, Ponsivakumar B, Rose Bijo and Soya T.J, “Secure4square”, International Conference on Circuit Power and Computing Technologies ICCPCT 2023 organized by Baselios Mathews 2nd College of Engineering, Kollam Kerala on 10-11th August 2023(Accepted for presentation).
  • Ananthu Anilkumar, Aswin M R, Annie G and Anu Jyothi, “Design and Development of an IoT based smart plug”, International Conference on Innovation In Engineering and Technology, technically sponsored by IEEE Kerala section, organized by Ilahia College of Engineering and Technology, Muvattupuzha, Kerala, India, July 13-14 2023.
  • Meekha Mathew, Sreesh P R, Madhukumar S and Arun P, “High-Performance Turbo Coder Design using MAP Algorithm and Gating Technology for Error Correction in Communication Systems”, International Research Journal of Engineering.(Accepted for publication 2023).
  • Elone Anne Benny, Sreesh P R, Madhukumar S and Arun P, “An Area and Power Efficient Kogge Stone Adder Using Gate Diffusion Input Logic”, International Research Journal of Engineering.(Accepted for publication 2023).
  • Gayathri Manoj, Snehamary Vinod, Sneha Mathai, Thomas M John and Sabarinath G P, “Performance Comparison of Different Classifier on Paddy Dataset from the South Indian Agricultural Belt”, First international Conference on Data Science and Advanced Computing (ICDSAC 2023), 23 – 24, June 2023.
  • Dana. F, Maria. S, Elias. K. P, Suryadeep. P, Arun. P and Anto. M, “An Electronic IV Monitoring, ceasing and alerting system”, SJCET Journal of Engineering & Management., Vol.16, pp.42-53, June 2023.
  • Seethal Maria, Rose Chirackel, Gancis Franco, Sachin Anu and Anto Manuel, “SMART MASK”, IEEE International Conference IConSCEPT 2023 organized by NIT Puthucherry, 25th -26th May 2023.
  •  Dana. F, Maria. S, Elias. K. P, Suryadeep. P, Arun. P and Anto. M, “Design and Development of an Automated Electronic System for Intravenous Infusion Control, Monitoring and Alerting”,2nd International Conference on Modern Trends in Engineering Technology and Management (ICMEM-2023) held at Sree Narayana Institute of Technology, Adoor, Kerala, India on 4th – 6th May 2023.
  •  Anns Maria Saji,Ashil George ,Brinto James, Donald M Jose and Jumey M George , “CARDIOCARE: Prediction of heart health with machine learning classification models”, International Conference on Advanced Wireless Communication and Pervasive Technologies (ICAWCPT-2023) 25th – 26th May 2023, Mar Baselios Christian College of Engineering and Technology, Kuttikanam, Kerala.
  • Antony, A., Benny, N., Krishnan, G.G., Saju, M.M., Arun, P., George, S.L, “Design and Development of a Smart Home Management System Based on MQTT Incorporated in Mesh Network”, Springer Innovations in Communication and Computing, pp.65-74, Feb.2023.
  •  Vrinda S V, Amina M K, Sreesh P R and Arun P, “Continuous Glucose Monitoring: A Review”, International Conference on Futuristic Technologies in Control Systems and Renewable energy at NIT Patna, India on 24-25th August 2022.
  •  Adithya Sunil, Ben Alphin Binny, Jobin Benny, Roshan Rajeev and Anto Manuel, “Predister”, International Journal for Research Trends and Innovation, Volume 7, Issue 6, ISSN: 2456-3315, June 2022.
  •  P. Arun, S. Madhukumar, K.K.Vishnu, M.Neha, I. Princy and S. Ron, “Diagnostic Feasibility of Time Domain Features for Detecting and Characterizing Cry Cause Factors – An investigation”, Australian Journal of Electrical and Electronics Engineering, Taylor and Francis, Vol.19,pp. 340-348, April 2022 (SCI).
  •  Vyshnavy Prakash, Amalu Shaji, Arjun K Mohan, Wishbin Robin, Sabarinath. G , “A Study On Convolutional Neural Networks for Crop Disease Classification”, International Journal for Research Trends and Innovation, Volume 7, Issue 6, 2022.
  •  G. Sabarinath., J. Manu, Shone Sunny, P. Prince, Nithin Jose and Melvin Kurian , “Design of Life Detection System for Survivor Tracking in Debris”, in Journal of Chengdu University of Technology (Science and Technology Edition), vol. 26, no. 8, Aug. 2021.(Scopus Indexed)
  •  P. Arun, N. Prajith, C. Melvin, S.N. Sreejith and S. Sandesh, “Design and development of an IoT based intelligent multi parameter screening system”, Materials Today: Proceedings, Elsevier, December 2021(Scopus Indexed).
  •  Sreesp. P.R and Amina M K, “Design and Implementation of UART AI on FPGA”,Materials Today: Proceedings, Elsevier, December 2021(Scopus Indexed).
  •  Shilpa L.G and Vrinda S V,”Design and Implementation of FAST RBSD Multiplier, “Materials Today: Proceedings, Elsevier, December 2021(Scopus Indexed).
  • Jacob Thomas, Akhil S Nair, Alan Sigi, Amrutha Karthikeyan and Devanarayanan V, “IoT based Baby Incubator”, International Research Journal of Engineering and Technology, Vol.6, pp.1-9, June 2021. (Scopus Indexed).
  • Juney M G., Aishwarya A, Jyothi B, Anjani S and Donymon J, “Braille based communication gloves”, Journal of Emerging Technologies and Innovative Research,Vol.8,pp 16-24, June 2021.
  •  N. F. Giji, A. Ramesh, M. Meera,V. Vipin, M. K. Nath and V. Sreejith, “Detection of Melanoma using Deep Learning Techniques: A Review,” 2021 International Conference on Communication, Control and Information Sciences (ICCISc), 2021, pp. 1-8 (Scopus Indexed)
  •  N. Prajith, C. Melvin, S.N. Sreejith, S. Sandesh and P.Arun, “Design and development of an IoT based intelligent multi parameter screening system”, Materials Today: Proceedings, Elsevier, December 2021(Scopus Indexed).
  •  Amina M K and Sreesp. P.R, “Design and Implementation of UART AI on FPGA”, Materials Today: Proceedings, Elsevier, December 2021(Scopus Indexed).
  •  Vrinda S V and Shilpa L.G, “Design and Implementation of FAST RBSD Multiplier, “Materials Today: Proceedings, Elsevier, December 2021(Scopus Indexed).
  • Akhil S Nair, Alan Sigi, Amrutha Karthikeyan, Devanarayanan V, Jacob Thomas,” IoT based Baby Incubator”, International Research Journal of Engineering and Technology, Vol.6, pp.1-9, June 2021. (Scopus Indexed)
  •  J. Manu, Shone Sunny, P. Prince, Nithin Jose, Melvin Kurian and G. Sabarinath, “Design of Life Detection System for Survivor Tracking in Debris”, in Journal of Chengdu University of Technology (Science and Technology Edition), vol. 26, no. 8, Aug. 2021.(Scopus Indexed)
  •  Aishwarya Anil, Jyothi Biju, Anjani S,Donymon Jomon and Juney M George, “BRAILLE BASED COMMUNICATION GLOVES”,Journal of Emerging Technologies and Innovative Research,Vol.8,pp 16-24, June 2021.
  •  J. Chittilappilly, J. Giby and K. Subramaniam, “Efficient Detection of Sheet Metal Defect Using KNN”, Journal of Green Engineering, Volume 10, Issue 10, pages 9670-9680, October 2020 (Scopus indexed).
  • B. Basheer and P. Arun, “Statistical Analysis and Evaluation of Non-Stationary Signal Using Temporal Features & Design and Simulation of Vibro arthrographic Signal Recorder”, SJCET Journal of Engineering & Management., Vol.12, pp.34-42, June 2019
  •  Abin Abraham, Ajith Kumar, Anisha Mathew, Elon Benny and Sabarinath G., “A study on the effect of substrate on Microstrip Patch Antenna Design” presented at the international conference of Energy and Environment, Kerala, September 2020
  •  Sajol Sunny Vettom, Sreelekshmi Raju, Soniya Siby, Sandra Maria and Giby Jose, Automated helmet detection using image processing algorithms, IJSTE, Vol.7, July 2020.
  •  A. M. Sali,H. Thampy, S.V. Immanuel and S.P. Sunitha “Waste classification using convolutional neural networks on edge devices” , International Journal of Innovative Science and Research Technology, Volume 5, Issue 11,Pp 1087-1091, November 2020.

Patents Obtained

Sl. No.Name of the FacultyApplication NoTechnologyPatent dateDept.Filing YearFiling Country
1Dr. Arun.P202041049776AAUTOMATED MILK COLLECTION CENTRE FOR INDIAN VILLAGES. November 20, 2020ECE2018India
Sl. No.Name of the FacultyApplication IndustryTechnologyPrincipal InventorDept.Filing YearFiling Country
1Dr. Giby JoseMedicalSYSTEM FOR VALIDATING MOBILITY OF A PATIENT AND A METHOD THEREOFDr. Giby JoseECE2020India
2Dr. Giby JoseMedicalDIGITAL STETHOSCOPE AND A PULMONARY DIAGNOSTIC SYSTEMDr. Giby JoseECE2020India

DEPARTMENTAL ACTIVITIES

Industry – Institute Interactions

  • Mr. Suraj Prem, Firmware Engineer, Nextica Technology Pvt Ltd. Bangalore, a subsidiary company of Green Cubes Technologies,USA. and esteemed alumna of SJCET,Palai (ECE 2011-15 batch) addressed semester3,5 and 7 students, ECE on the topic of “Industrial applications of Core Courses in Electronics and Communication Engineering and an Interactive session on interview / Placement failures” in association with ECSA of SJCET, Palai on 07/09/2024.
  • Er.Sasikumar Selvaraj,Training session head – South Region, SMC Cooperation India Pvt.Ltd, delivered a session on ‘Fundamentals of Industrial Automation’ to the B.Tech pre final year students of Electronics and Communication Engineering Dept. on 03/09/2024 at Mother Teresa Block seminar hall in association with the students association ECSA.
  • Mr. Adarsh S, Biomedical Engineer, Cyrix Healthcare Private Limited, Kerala delivered a session on “Recent Advancements in medical imaging technologies” at the AICTE VAANI Seminar organized by the Dept. of Electronics and Communication Engineering at the AICTE VAANI Seminar, SJCET Palai, on 31st August 2024.
  • Mr.Ramesh C R, Firmware Engineer, LITIN Labs Pvt. Ltd. Kerala delivered a session on “Introduction to Design of Electronics systems for Healthcare and Monitoring” at the AICTE VAANI Seminar organized by the Dept. of Electronics and Communication Engineering at the AICTE VAANI Seminar, SJCET Palai, on 31st August 2024.
  • Mr. Anto P Joy,Biomedical Engineer Caritas Hospital & Institute of Health Sciences,Kottayam delivered a session on ‘How Wearable Technology is Revolutionizing Healthcares’ at the AICTE VAANI Seminar, SJCET Palai, on 30th August 2024.
  • Dr. Nisha J S, Assistant Professor VIT, Vellor,Tamil Nadu took a session on ‘AI and Machine Learning in healthcare’ at the AICTE VAANI Seminar, SJCET Palai, on 30th August 2024.
  • Er.Anoop Gopinathan, Scientist/Engineer ‘E’, Sree Chitra Tirunal Institute for Medical Sciences & Technology (SCTIMST), Trivandrum delivered a session on “Design and Development of Modern Implantable Medical Devices” at the AICTE VAANI Seminar, SJCET Palai, on 30th August 2024.
  • Er.Sarath S Nair, Scientist/Engineer ‘F’, Sree Chitra Tirunal Institute for Medical Sciences & Technology (SCTIMST), Trivandrum delivered a session on “Modern Implantable Medical Device Technologies” at the AICTE VAANI Seminar, SJCET Palai, on 30th August 2024.
  • Mr. Adarsh S, Biomedical Engineer, Cyrix Healthcare Private Limited,Kerala handled a session on ‘Therapeutic devices including Ventilator’ at the AICTE VAANI Seminar, SJCET Palai, on 29th August 2024.
  • Mr.Polly Thomas, Manager-Engineering at Mar Sleeva Medicity Palai delivered a session on “Smart Power Management and Energy Efficiency in Healthcare Devices” at the AICTE VAANI Seminar, SJCET Palai, on 29th August 2024.
  • Smart Wearables – The Signal Processing Aspects by Dr. Rajesh M V, Principal, College of Engineering Poonjar, delivered a session on “Smart Wearables – The Signal Processing Aspects” at the AICTE VAANI Seminar, SJCET Palai, on 29th August 2024.
  • Dr. Unni S Pillai, Senior Consultant in Medical Oncology, Caritas Hospital, Kottayam, delivered a session on “Pioneering the Future of Oncology through Electronics and Innovation” at the AICTE VAANI Seminar, SJCET Palai, on 29th August 2024.
  • A campus workshop on “Basics of Electronics System Design” by Mr. Shalu Thomas, Founder and CEO of Digital Core Technologies, was successfully conducted for the Seventh semester B.Tech ECE students of the 2021-25 batch in association with ECSA of SJCET, Palai on 19/06/2024.
  • Ms. Maria James, Design Engineer, DCT,Kochi, Kerala and esteemed alumna of SJCET,Palai (ECE 2018-22 batch) addressed students of 2021-25 batch ECE with her experience in association with ECSA of SJCET, Palai on 19/06/2024.
  • Mr. Muhammed Saheer, Senior Cybersecurity Analyst, Qatar Airways and esteemed alumnus of SJCET,Palai (ECE 2006-10) shared his expertise with S7 ECE students (2021-25 batch) on 14/06/2024 in association with ECSA of SJCET, Palai.
  • Mr. Saheer Muhammed C P, HVAC Engineer at MAG Group, Dubai, shared his expertise with seventh-semester ECE students (2021-25 batch) on June 14, 2024 in association with ECSA of SJCET, Palai.
  • Ms. Jeslet Joy, a distinguished alumna of the 2020-24 ECE batch, currently placed at Digital Core Technologies (DCT) in Kochi, Kerala, shared her valuable inputs on June 14, 2024, on how to effectively prepare for the recruitment process at DCT with the seventh semester ECE students of the 2021-25 batch in association with ECSA of SJCET, Palai.
  • Dr. Tripti S. Warrier of DoE at CUSAT, Kochi, Kerala delivered a half-day title session on ‘Fundamentals of SoC and its design methodologies’ as part of the FDP on Unleashing the Potential of System-On-Chip and its Architecture for the faculties from this Dept. as well as from various colleges on 15/01/2024 at SJCET, Palai.
  •  Mr. Ramesh C R of LITIN Design Labs Pvt. Ltd, Singapore delivered a half-day theory and lab session on Vivado to Introduce SoC and its Types  for the faculties from this Dept. as well as from various colleges on 15/01/2024 at SJCET, Palai.
  • Ms. Jenu Annai Abraham, SOC Engineer, Synopsys India Pvt. Ltd,Bangalore delivered a half-day session on significance of design verification in SOC  for the faculties from this Dept. as well as from various colleges on 16/01/2024 at SJCET, Palai.
  • Dr. Jayakumar E. P, Assistant Professor, Dept. of ECE, NIT Calicut delivered a half-day theory and lab session on vivado with a major focus on SoC design challenges  for the faculties from this Dept. as well as from various colleges on 16/01/2024 at SJCET, Palai.
  • Dr. Sabarimalai Manikandan,Dept. of Electrical Engineering of IIT Palakkad delivered a half-day session on Advanced Semiconductor Technologies for SoC for the faculties from this Dept. as well as from various colleges on 17/01/2024 at SJCET, Palai.
  • Mr. Christy Nainan, project engineer, Magnima LLC USA delivered a one-hour physical hands on session on Air Point Ring  for the faculties from this Dept. as well as from various colleges on 17/01/2024 at SJCET, Palai.
  • Dr. Subrahmanyam Mula of IIT Palakkad delivered a half-day session on Vivado to focusing on Custom IP design for real-time signal processing applications  for the faculties from this Dept. as well as from various colleges on 17/01/2024 at SJCET, Palai.
  • Dr. Bidhan Pramanick of IIT Goa delivered a half-day session on Introducing Lab on Chip (LOC)  for the faculties from this Dept. as well as from various colleges on 18/01/2024 at SJCET, Palai..
  • Dr. Bindiya T. S of NIT Calicut delivered a half-day session on Low power SoC design and Research trends and a lab session on VLSI Backened design flow for the faculties from this Dept. as well as from various colleges on 18/01/2024 at SJCET, Palai.
  • All staff of Department of Electronics and Communication Engineering (ECE) visited K R Narayanan National Institute of Visual Science and Arts, Chengalam, Kottayam,Kerala on 19/01/2024.
  • Mr. Mithun C.A, Product Design Engineer at SanDisk, Bangalore delivered a half-day session on SoCs beyond consumer electronics  for the faculties from this Dept. as well as from various colleges on 20/01/2024 at SJCET, Palai.
  • Mr. Ullas Ponnadi Managing Partner at UBVenture LLP delivered an interactive physical session on the topic of The Future of Jobs for B. Tech students of 2020-2024 batches on 04/12/2023 in association with ECSA of SJCET, Palai.
  • Ms. Gayathri. K, Senior Systems Engineer of Infosys Bangalore and Mr. Devanarayanan V, Hardware Engineer, Kimbal Electronics of Technopark in Trivandrum interacted with S1 ECE students to clear their doubts on how to proceed in Engineering and its job opportunities on 27/11/2023 at SJCET, Palai
  • Ms. Diya Sebastian of S7 Electronics and Communication department of SJCET Palai, delivered an online tech-talk on the topic Parallel Hybrid Aircraft for the students from every year on 23/11/2023 at SJCET Palai.
  • Mr. Rinu Mathew, Design Verification Engineer of Smartsoc Solutions and Former President of ECSA delivered an online tech talk on overview of VLSI industry on 18/11/2023.
  • Mr. Anantha Krishnan M, Data Analytics Engineer of Guide house India Pvt. Ltd in Trivandrum & Ms. Amritha Asok, Senior Systems Engineer of Infosys Bangalore delivered an offline interactive session for S5 students for clearing their doubts on 10/11/2023 at SJCET, Palai
  • Mr. Aibel Bin Zacariah, S1Artificial Intelligence and Data Science of SJCET Palai, delivered an online tech-talk on the topic Introduction to Arduino and its Applications for the students from every year on 07/11/2023 at SJCET, Palai.
  • Mr. Ruben Abraham Shibu, Security Service Associate of Synopsys Inc. Banglore and Mr. Nishanth Benny addressed the students of S5 ECE with their experience on 04/11/2023 at SJCET, Palai.
  • Ms. Rakshith Kashyap, Associate Manager at CoreEL Technologies and Siva Subramanian R, Application Engineer at CoreEL Technologies delivered a three-day workshop on the fields of Signal Processing, Image Processing, Communications, Deep Learning, and Neural Networks using MATLAB for final year students on 27/10/2023 at SJCET, Palai.
  • Mr. Arjun Santhosh, S5 Electronics and Communication Engineering Student at SJCET, Palai delivered an online tech-talk on the topic Harvesting Radio Frequency Energy for the students on 24/10/2024 at SJCET, Palai.
  • Mr. Muthukrishnan G, Staff Engineer of Juniper Network,Bangalore delivered an online session on ‘Real-time Application on AWS cloud Developments’ for the students on 07/10/2023 at SJCET, Palai.
  • Ms. Angitha Maria Mathew, 2016-20 Batch ECE delivered an online prep talk on Preparing for Interviews and Building Resumes for all the students on 01/10/2023 in association with ECSA at SJCET, Palai.
  • Mr. Martin Francis, student of S7 ECE at SJCET Palai, delivered an online webinar on AI Images using Microsoft Bing for all the students on 21/09/2023 in association with ECSA at SJCET, Palai.
  • Ms. Chippymol K Binu, S7 Electronics and Communication Engineering Student at SJCET, Palai delivered an online workshop on Mendeley, for all students on 12/09/2023 in association with ECSA at SJCET, Palai.
  • Ms. Jeslet Joy of S7 Electronics and Communication Department, SJCET Palai delivered an online tech-talk on the topic Aireborne Radars for all the students on 06/06/2023 in association with ECSA at SJCET, Palai.
  • Prof. SABARINATH G, Assistant Professor in department of Electronics and Communication Engineering of SJCET, Palai delivered an online webinar on How to Build a Resume for the students (mainly focused on 3rd yrs.)  on 06/03/2023 in association with ECSA at SJCET, Palai.
  • S. Thomas, MD & CEO of Digital Core Technologies Pvt Ltd had given a one-day Workshop on BASICS OF ELECTRONIC SYSTEM DESIGN for the final year students of 2020-24 batch B. Tech of the department on 14/08/2023 in association with Electronics and Communication Students’ Association (ECSA) of SJCET.
  • Mr.  Justin Thomas, Librarian, SJCET Palai had given an offline workshop on “EFFECTIVE UTILISATION OF ELECTRONICS RESOURCES IN ENGINEERING PROJECT AND SEMINAR’’ on 16th August 2023 from 9:30 am to 12:30 pm in association with Electronics and Communication Students’ Association (ECSA) of SJCET.
  • Electronics and Communication Students’ Association (ECSA) of SJCET, Palai organized an online session on ‘HOW TO PREPARE FOR YOUR DREAM JOB IN ELECTRONICS’ by Mr. Mathew Benny, Software Systems Engineer, Hewlett-Packard, Bangalore on 12th April 2023.
  • ECSA of SJCET, Palai organized an online session ‘COMMUNICATIONS SYSTEMS IN KOCHI METRO RAIL LTD.’ by Mr.  Shijin P V.  Telecom In charge (S&T Projects), KMRL, Kochi on  31st  March
  • ECSA of SJCET organized a two-day offline workshop on ‘INTRODUCTION TO SDR AND DEMYSTIFYING THE DSP KIT DSK6748’ by  Mr.  Abhishek  K  R,  Applications  Engineer,  Starcom,  Bangalore  on  4th and  15th March  2023.
  • ECSA  of  SJCET  organized  an  offline  workshop  on  “EFFECTIVE  UTILISATION  OF  ELECTRONICS  RESOURCES  IN  ENGINEERING  PROJECT  AND  SEMINAR’’ on  14th   September  2022  at  2:30pm  IST by Mr.  Justin  Thomas,  Librarian,  SJCET  Palai.
  • ECSA  of  SJCET,  Palai  organized a technical  session on “ENTREPRENEURSHIP- OPPORTUNITIES AND CHALLENGES” by Mr. Tom Thomas, Director  and  CTO  ,  KTS  InfoTech, Kottayam, Kerala.
  • ECSA  of  SJCET  organized  an  offline  hands  on  workshop  on  “HOME  AUTOMATION  SYSTEM” in  collaboration  with  SILICORE  INNOVATIONS,  on  18th   June  2022  by  Shibin  S,  Director,  SILICORE  INNOVATIONS,Kottayam,Kerala.
  • Shalu  Thomas,  MD  &  CEO  of  Digital  Core  Technologies  Pvt  Ltd  had  given  a  two  day  session  on  “ELECTRONIC  SYSTEM  DESIGN”  for  the  final  year  students  of  the  department  on  16th  &  17th  September  2022 in association with Electronics and Communication Students’ Association (ECSA)  of  SJCET.
  • ECSA  of  SJCET  Palai  organized  an  online  webinar  on  “HOW  TO  BUILD  A  RESUME”  mainly  focused  on  3rd ECE  Students  on  11th  June  2022.The  session  was  handled  by  Prof.  Sabarinath  G,  Assistant  Professor  in  department  of  Electronics  and  Communication  Engineering  of  SJCET  Palai.
  • ECSA  of  SJCET,  Palai  organized  a  half  day  seminar  on  “VEGA  PROCESSOR  AND  ECOSYSTEM”,  in  association  with  CDAC,  on  17th   May  2022.  The  session  was  taken  by  Mr.  Libin  T  T,  Joint  Director  at  CDAC.
  • ECSA  of  SJCET,  Palai  organized  a  MINI  PROJECT  ORIENTATION  PROGRAMME,  named  “FROM  SPARK  TO  FIRE”,  in  association  withTorc  Infotech,  Kochi  on  12th  May  2022.  The  session  was  taken  by  Mr. Abhi  Krishna  Harikumar, CEO  of  the  company.  It  was  conducted  from  9:00 AM  –  12:30 PM  at  the  Seminar  hall  of  Mother  Theresa  block.
  • ECSA  of  SJCET,  Palai  organized  a  webinar  on  the  topic,  “INTRODUCTION  TO  REAL  TIME  OPERATING  SYSTEM”  on  06th  May  2022.  The session was taken by Mr.  Sooraj  Prem,  Firmware  Engineer.
  • S Thomas, MD & CEO of Digital Core Technologies Pvt Ltd had given a one day session on ELECTRONIC SYSTEM DESIGN for the final year students of the department on 21/12/2021.
  • ANIL PATHAK, Senior Director – Product Management & Engineering at HARMAN International Pvt. Ltd. delivered a session for the PG students on OVERVIEW OF WEARABLE TECHNOLOGY, DEVICES , VARIOUS USE CASES, CHALLENGES & POTENTIAL SOLUTIONS on 17/01/2022.
  • Roshan Gopalakrishnan, Rapsodo Pvt. Ltd, Singapore delivered a session for the selected UG and PG students on WEARABLE SENSORS: MODALITIES, CHALLENGES, AND PROSPECTS on 18/01/2022.
  • Rajasekhar Radhakrishnan, Formerly Intellectual property law Manager at Honeywell delivered a session for the PG students on DATA FROM SENSORS – A PRIMER FOR INTEGRATED SENSING AND NETWORKS on 19/01/2022.
  • Mithun C.A, Product Design Engineer, Memory Technology, SanDisk/ Western Digital, Bangalore has delivered a session on HYBRID POLYMERS FOR  WEARABLE DEVICEs on 19/01/2022.
  • BHAVANI SHANKER, Executive Manager & Head – loT,  Efftronics Systems Pvt.  Ltd., Andhra Pradesh has delivered a session on RESEARCH TRENDS IN WEARABLE TECHNOLOGY on 19/01/2022.
  • Derek Kuttikkat, Product Manager – Wearables, Titan Company Ltd., Bangalore delivered a session for the selected UG and PG students on WHAT IT TAKES TO MAKE AN END-CONSUMER WEARABLE PRODUCT WITH A CONSUMER MINDSET FOR THE INDIAN AND GLOBAL AUDIENCE? on 21/01/2022.
  • Electronics and Communication Student’s Association (ECSA) of SJCET, Palai organized a webinar on the topic OPPORTUNITIES AFTER ENGINEERING THROUGH GATE/ESE/PSU on February16,2022. The session was handled by Mr. Manimohan Trinath.S of ACE academy.
  • S Thomas, MD & CEO of Digital Core Technologies Pvt Ltd had given a one day session on INDUSTRIAL PERSPECTIVE OF ELECTRONIC SYSTEM DESIGNfor the final year students of the department on 29/03/2021.
  • Bhavani Shankar Surabhi, Executive Manager,Head-IOT, Efftronics Systems Pvt. Ltd. delivered a session for the PG students on INDUSTRY REQUIREMENTS AND INDUSTRIAL APPLICATIONS of IoT on 02/01/2021
  • Brijesh Madhavan, CEO, Curvelogics Advanced Technology Solutions Pvt.Ltd delivered a session for the PG students ON INDUSTRIAL PERSPECTIVE TO CLASSIFICATION AND REGRESSIONwith hands-on practice on 30/12/2020
  • Rajasekhar Radhakrishnan, Formerly Intellectual property law Manager at Honeywell delivered a session for the PG students on SMART SENSORS & SYSTEMS AND DATA FROM SENSORS – a primer for integrated sensing and networks on 29/12/2020
  • R Srinivasan, Programme Head, ICFOSS, Trivandrum delivered a session for the PG students on IOT FUNDAMENTALS AND TRENDS IN IOTon 28/12/2020
  • The department of ECE in association with IEEE SB conducted a one day talk on 5G COMMUNICATIONby Mr. Libin Jose Meledam , Staff Engineer, Radisys on 8th October 2018 which was attended by third and fourth year students.
  • The department of ECE in association with IEEE SB and Continuing Education & Skill Development Center, SJCET conducted a Technical Talk Telcom systems @ Kochi Metro Rail Limitedon 27th October 2018 which was attended by third and fourth year students.

Corporate Social Responsibility (CSR) activities

ProgramCandidates attendedNature of trainingPeriod of trainingField of training
Conducted a training program on DSP TMS320C6748 and its Application at MBC Peermade,Kerala Sixth Semester B.Tech StudentsStudents training8th February,2023DSP TMS320C6748LCDK and its Application
A project entitled AILE was conducted on 27/09/2021 and 28/09/2021 which was funded by IEEE R-10 and Received an amount of USD 150 .06
Workshop for students
2 dayMr. Nishanth Benny of S7 ECE was the student coordinator.
A project entitled PREVENTIA (An automated system to sanitize the masks) was completed as an Interdisciplinary kind of project and received an amount of USD 843 was sanctioned for by HAC R10 HTA on 15-07-2021.09Skill enhancement
9 months from the scratch to final productThe listed students of S3 ECE was involved in this project
Mr.Adithyan S Philip
Mr. Melwin Shaju
Ms.Angel Anna Alex
Ms. Blessy Babu
Ms.Jeslet Joy
A project entitled MATROBO (This device is more like a robot, that monitors and examines the patients’ blood pressure, pulse, sugar, and other basic checkups) was completed as an Interdisciplinary kind of project and received an amount of USD 488 was sanctioned for by HAC R10 HTA on 15-07-2021.08Skill enhancement
9 months from the scratch to final productMr. Nishanth Benny of S7 ECE was the student coordinator.
Rebuild Kerala 56Rehabilation works 15th August to 11th SeptemberStatewide
Social Service 48As a part of social service activity build a water harvesting system with storage capacity of 30,000 liters2nd March to 4 th March Chakkikavu,Idukki
Social Service 52Tourist Spot Development5th March to 6th March Mechal,Kottayam
Social Service 16Renovation water reservoir 7th March to 8th March Mechal,Kottayam

Consultancy

Area of consultancyBeneficiariesIncome Generated
Device to count PUSH up for world record attempt St. Joseph Institute of Hotel management and Catering Technology Yet to avail financial payments
Remote monitoring and control of water distribution systemSH Hostel, Muttom Yet to avail financial payments

Awards and Recognitions

  1. Mr .Jiss Joseph, Mr. Anu Somarajan K ,Mr. Gladwin Biju and Mr. Elvin Alousius of S8-ECE won the third place in the paper presentation contest for the paper entitled “Safety Monitoring System for Boats” at APJAKTU techfest-2024,which took place on 16th February 2024 at Ahalia College of Engineering, Palakkad.
  2. Mr. Josil N D, Ms. Ann Maria Johney, Mr. Jose Abraham and Ms. Abhisree B of S8-ECE won second place in the paper presentation contest for the paper entitled “Smart Wearable Jacket for Assisted Outdoor Navigation of Visually Impaired” at APJAKTU techfest-2024, which took place on 16th February 2024 at Ahalia College of Engineering, Palakkad.
  3. Ms. Aleena James, Ms. Jintumol Joseph, Mr. Vishak T A, Ms. Tissa Mary Anil, and Ms. Liz Elizabeth Biju of S6-ECE won second place in the Ideathon competition at APJAKTU techfest-2024, which took place on 16th February 2024 at Ahalia College of Engineering, Palakkad.
  4. Sunitha S Pillai, Assistant Professor ECE presented the paper titled “Rainwater Monitoring System” in the International conference on Signal Processing, Instrumentation & Communication Engineering (SPICE 2K24) organized by Department of Electronics & Communication Engineering, MBITS in association with Bureau of Indian Standards(BIS) on 9th & 10th February 2024 and selected as the best paper.
  5. Received a Financial Aid of 3.5 Lakhs from AICTE – ATAL Academy to conduct an FDP on ‘Unleashing the Potential of System-On-Chip and its Architecture’ during 15/01/2024 to 20/01/2024 in offline mode.
  6. Dr. Arun. P, Associate Professor and Head, Dept. of ECE elected as the Secretary, IEEE Robotics and Automation Kerala Chapter for the year 2024.
  7. Sabarinath G Pillai selected as Secretary, IEEE India Council for the year 2023.
  8. Arun. P selected as Secretary, IEEE Robotics and Automation Society Kerala Chapter for the year 2023.
  9. A project entitled “Low complexity hearing aid Design” submitted by Dr. Tomson Devis have been funded by KTU CERD under RSM scheme for Rs.  1,65,000/- in February 2023.
  10. A project proposal entitled ‘Student Mentorship Programme to enhance the academic and extracurricular activities of the students’ submitted by Mr. Sreesh P R have been funded by IEEE Circuits and Systems Society (CAS) for Rs.  5,56,960/- in October 2022.
  11. A project entitled “Design and development of an automated Electronic System for predicting the weather state” has been submitted by Mr. Anto Manuel to KTU CERD RSM
  12. The project proposal entitled ‘Design and Development of a system for the Differential Diagnosis and Classification of Voice disorders from the VocalCord Vibration’ has been submitted by Dr. Arun.P, Associate Professor to AICTE under RPS scheme and is selected for funding during July 2022. (approval orders awaited).
  13. Madhukumar S, Professor and Vice Principal elevated to IEEE Senior member grade in February 2022.
  14. Arun. P, Associate Professor and Head elevated to IEEE Senior member grade February 2022.
  15. Sabarinath G Pillai nominated and elected as President, Internet Society – India TRV Chapter for 2022.
  16. Sabarinath G and Prof. Sanju Sebastian received an amount of USD 15000 worth credits of Azure consumption from Microsoft for the project titled Identification and Classification of disease/pest infestations /nutrient deficiency in the south Indian agriculture belt using artificial intelligence during June 2022.
  17. Arun. P, Associate Professor has received a research seed money of Rs.40000/- and has been sanctioned by KTU for the project entitled COVBOT -An loT based intelligent wall mount multi- functional screening system on 02/09/2021.
  18. Arun. P, Associate Professor, received an amount of USD 150 for a project entitled AILE by IEEE R-10 on 21/02/2021.
  19. Madhukumar. S, Professor received an amount of USD 843 was sanctioned for a project entitled PREVENTIA by HAC R10 HTA on 15-07-2021.
  20. Tomson Devis, Assistant Professor has successfully completed his PhD on the Title ‘Auto-reconfigurable and Hardware-efficient Filter Bank Structures for Auditory Compensation in Digital Hearing Aids’ was performed at RIT, Pampady, affiliated to APJAKTU on April 8, 2022.
  21. Tomson Devis, Assistant Professor coordinated an AICTE sponsored International Conference on ‘Artificial Intelligence and Mechanical Systems’ jointly with the ME department from 8-9 December 2021.
  22. Arun. P, Associate Professor has conducted an ATAL FDP on ‘Wearable devices’ from 17th January to 21st January 2022.
  23. Juney M George, Assistant Professor has secured admission for Ph.D programme (Part-time) at KTU, Kerala in 2022 batch.
  24. Manju James, Assistant Professor has secured admission for Ph.D programme (Full-time) at KTU, Kerala in 2022 batch.
  25. Department has signed an MoU with M/S HAPT Engineering and Business Solutions, Palai, Kottayam on 25/08/2021 to agreement that seeks to foster collaboration, provide opportunity for hands-on experience, and to facilitate advancement of knowledge on the basis of reciprocity, best effort, mutual benefit, and frequent interactions.
  26. Department has signed an MoU with M/S CORDS Innovations Pvt. Ltd. Ernakulum, Kerala on 10/01/2022 to promote more effective use of their resources and provide each of them with enhanced opportunities.
  27. A Radio Community club is formed by the Dept. of ECE and EEE as a joint venture to learn and explore infinite possibilities and ideas about radio communication, amateur radio and more in 2022.
  28. Sabarinath G Pillai selected as Vice Chairman, Young Professionals, IEEE India Council 2021.
  29. Arun.P, nominated and selected as Coordinator, Academic Relations, Young Professionals at IEEE India Council in 2021.
  30. Arun. P received the outstanding IEEE student branch counselor award-2020 of IEEE Kerala section.
  31. Arun. P received the outstanding IEEE student branch counselor award-2020 of IEEE Kochi Sub-section.
  32. Tomson Devis, Assistant Professor received AWSAR (Augmenting Writing Skills for Articulating Research) award 2019 by Department of Science and Technology (DST) Award 2019 for the research story entitled “Can You Hear Me?”.
  33. Sabarinath G Pillai selected as Vice Chairman, IEEE Kochi Subsection 2019.
  34. Sabarinath G Pillai nominated and elected as President, Internet Society – India TRV Chapter for 2019.
  35. Sabarinath G Pillai received IEEE MGA Global Young Professional Achievement Award for 2018.

LINK OF INNOVATIONS AVAILABLE AS
E-RESOURCES

NPTEL ECE
IEEEXPLORE

NEWS LETTERS

MAGAZINE

X