Abyson Scaria

Books /Chapters/ Monograph

1. “Evolutionary Optimization of Material Removal Processes: Multi-response Optimization During High-speed Drilling of Composite Laminate Using Grey Entropy Fuzzy (GEF) and Entropy-based Weight Integrated Multivariate Loss Function” was published by Taylor & Francis Group, pp. 23–44.

International Journals

• “An Artificial Bee Colony Approach for Multi-Objective Job Shop Scheduling” was published in Procedia Technology, Elsevier, Volume 25, in 2016.

• “Development & Characterization of Alumina Coating by Atmospheric Plasma Spraying” was published in Materials Science & Engineering, IOP, 2018, Volume 330, Article 012043.

• “A Firefly Algorithm Approach for Multi-Row Facility Layout Problem” was published in Materials Science & Engineering, IOP, 2018, Volume 396, Article 012072.

• “An Optimization of Evacuation Chain for Disaster Relief” was published in the International Journal of Mechanical and Production Engineering Research and Development, Trans Stellar, Volume 9, in 2019.

• “An Integrated Production & Distribution Model for the Supply of Relief Kits in Flood Relief Supply Chains” was published in the International Journal of Logistics Systems and Management, Inderscience, in 2022 (DOI: 10.1504/IJLSM.2022.10046609).

• “An Integrated Operations Model for Supply of Relief Items under Path Disruptions” was published in OPSEARCH, Springer, in 2023 (DOI: 10.1007/s12597-023-00647-y).

National Journals

• “Multi-Objective Job Shop Scheduling Using Modified Genetic Algorithm” was published in the Journal of Engineering & Management, SJCET, Volume 7, 2014 (ISSN 2394-8647).

• “An Investigation into the Effect of Magnetic Fuel Energizer on SI Engine” was published in the Journal of Engineering & Management, SJCET, Volume 8, 2015 (ISSN 2394-8647).

International Conferences

• “Multi-Objective Flow Shop Scheduling Using Modified Genetic Algorithm” was presented at the International Conference on Technological Trends, CET Thiruvananthapuram, 25–27 November 2010.

• “Transformation of Manufacturing” was presented at iCoMEt’12, SJCET Palai, 20–21 January 2012.

• “Integration of Supply Chain Operations to Improve Responsiveness in Customized Production under Resource Constraints” was presented at the International Colloquium on Recent Trends in Engineering – 2020, MACE Kothamangalam, March 2020.

• “Optimization of the Supply of Relief Kits from Multiple Facilities under Path Disruptions” was presented at the International Conference on Emerging Trends in Mechanical and Materials Engineering – 2021, Christ College of Engineering, Irinjalakuda, 13–15 July 2021.

• “Relief Supply Optimization of Time-Sensitive Products by ε-Constraint Method” was presented at the XXIV Annual International Conference of The Society of Operations Management – 2021, XLRI Jamshedpur, 12–15 November 2021.

• “An AHP Approach to Prioritize Sustainability Enablers in Vaccine Supply Chains” was presented at the International Conference on Advances in Industrial Engineering & Management – 2022, CET Thiruvananthapuram, 18–22 March 2022.

• “Sustainable Flow Shop Scheduling” was presented at the 2nd International Conference on Advances in Manufacturing & Material Science – 2022, Muthoot Institute of Technology & Science, Kochi, 7–9 July 2022.

• “A Sustainable Relief Distribution Model for Medical Supply during Natural Disasters” was presented at the International Colloquium on Advances in Engineering and Technology, IC@MACE2023, Mar Athanasius College of Engineering, Kothamangalam.

National Conferences

• “Metaheuristic Approach to Production Scheduling: A Review” was presented at CoMEt’13, SJCET Palai, on 15 June 2013.

• “A Review of Failure Mode & Effect Analysis in Manufacturing Industry” was presented at the National Conference on Advanced Trends & Technologies in Mechanical Engineering, Caarmel Engineering College, Pathanamthitta, on 27–28 September 2013.

Coordinated

• “Evolutionary Optimization of Material Removal Processes: Multi-response Optimization During High-speed Drilling of Composite Laminate Using Grey Entropy Fuzzy (GEF) and Entropy-Based Weight Integrated Multivariate Loss Function” was published by Taylor & Francis Group, pp. 23–44.

Participated

1. Completed a one-week training on “Teaching Excellence and Methodologies” in June–July 2011, organized by the Indian Society for Technical Education.
2. Attended a three-day workshop on “Composite Materials” from 29 February to 2 March 2012 at the College of Engineering, Trivandrum.
3. Completed a two-week training on “Introduction to Research Methodologies” from 25 June to 4 July 2012, organized by IIT Bombay (NMEICT).
4. Attended a two-week training on “Engineering Thermodynamics” from 11–21 December 2012, organized by IIT Bombay (NMEICT).
5. Participated in a two-day workshop on “Advanced Automobile Engineering” on 17–18 May 2013 at SJCET, Palai.
6. Attended the one-day National Conference on “Mechanical Engineering for Future” on 15 June 2013 at SJCET, Palai.
7. Completed a three-day workshop on “Multivariate Analysis using SPSS & Spreadsheets” in January–February 2014 at NIT Calicut.
8. Attended a two-week training on “Fluid Mechanics” from 20–30 May 2014, organized by IIT Kharagpur (NMEICT).
9. Participated in the one-day 25th Annual Convention of ISTE, Kerala Section, on 25 October 2014 at Jyothi Engineering College, Cheruthuruthy.
10. Completed a two-week training on “Technical Communication” from 8 October to 5 December 2015 at IIT Bombay (NMEICT).
11. Attended a two-day workshop on “Design and Engineering” on 30–31 October 2015, organized by APJ Abdul Kalam Technological University.
12. Participated in a one-day workshop on “Pursue, Publish, Prosper” on 30 March 2016, organized by ISTE Staff Chapter, SJCET, Palai.
13. Completed a six-day training on “Advanced Mechanics of Solids” from 5–7 and 23–25 January 2017, organized by APJ Abdul Kalam Technological University.
14. Attended a two-day workshop on “NBA Accreditation” on 18–19 June 2018 at SJCET, Palai.
15. Participated in a one-day “Workshop on Safety” on 29 June 2018 at SJCET, Palai.
16. Attended a one-day workshop on “Renewable Energy – Opportunities and Challenges” on 9 November 2018 at SJCET, Palai.
17. Completed a five-day training on “Recent Advances in Manufacturing Engineering” from 7–11 January 2019 at SJCET, Palai.
18. Attended a five-day training on “Recent Advances in Fuel Cells” from 8–12 July 2019 at SJCET, Palai.
19. Completed a six-day workshop on “Advances in Green Energy Technologies” from 16–21 December 2019 at GEC, Thrissur.
20. Participated in a five-day ATAL FDP on “Artificial Intelligence” from 18–22 January 2021 at Sree Buddha College of Engineering, Pattoor.
21. Attended a three-day workshop on “Additive Manufacturing & 3D Printing” from 12–14 July 2021 at SJCET, Palai.
22. Completed a five-day training on “Decision Modelling in Transportation and Logistics Industry” from 27 February to 3 March 2023 at NIT Calicut.
23. Participated in a six-day ATAL FDP on “Innovations in Electric Vehicle Engineering: Battery Thermal Management and Generative Design Perspectives” from 2–7 December 2024 at SJCET, Palai.
24. Completed a six-day workshop on “Innovation, IP Management & Industry Connect” from 20–25 January 2025 at St. Thomas College of Engineering & Technology, Chengannur.
25. Attended a five-day training on “Engineering Entrepreneurship & IPR” from 30 January to 9 February 2025 at SJCET, Palai.