Student Verification: +91 9495684408 | Admission Helplines : +91 8078 700 700 | Admission 2025 - Apply Now | Library Book Search | Library Home
FacebookInstagramLinkedinYouTubeTwitter

Justin Jose

/Justin Jose
Justin Jose 2025-06-19T05:31:15+00:00

Prof.Justin Jose

Assistant Professor
Department of Civil Engineering
Mobile Number: 9447780597
Email:justinspkl@gmail.com
Date of joining : 13/02/2017
Association with the institution: Regular

Sl. NoQualificationUniversityInstitutionYear of passingSpecialization
1B.TechMGSt. Joseph’s College of Engineering & Technology, Palai, Kerala.2011Mechanical Engineering
2M.TechCALICUTGovernment Engineering College, THRISSUR2014IC Engines & Turbomachinery
3Ph. DAPJ Abdul Kalam Technological UniversitySt. Joseph’s College of Engineering & Technology, Palai, Kerala.PursuingHeat Transfer
Sl. NoName of the college/IndustryDesignationExperience                ( Years & Months)
1St. Joseph’s College of Engineering & Technology, PalaiAssistant Professor8 Years and 3 Months, as on May 2025 ( Still Continuing )
2BTC College of Engineering & Technology, KoothattukulamAssistant Professor2.Years and 6 Months
3Visveswaraya Institute of Engineering Technology, Mattakkara, Karimpany P.O, KottayamLecturer11 months
  1. Attended a five-day Faculty Development Programme on “Guidance and Counselling” organized by SJCET Palai from 4th to 8th December 2017.
  2. Participated in a two-day workshop on “NBA Accreditation” held at SJCET Palai on 18th and 19th June 2018.
  3. Completed a one-day training program on “ISO 9001:2015 Awareness” conducted by Zandig TQM Solutions Pvt Ltd at SJCET on 28th June 2018.
  4. Participated in a one-day workshop on “Machine Learning and AI in Predicting Climate Change” organized by SJCET Palai on 7th September 2018.
  5. Attended a one-day workshop on “Renewable Energy – Opportunities and Challenges” at SJCET Palai on 9th November 2018.
  6. Completed a five-day KTU-sponsored FDP on “Recent Advances in Manufacturing Engineering” at SJCET Palai from 7th to 11th January 2019.
  7. Participated in a six-day Short Term Training Programme on “Advanced Methods in Compressible Fluid Flow Analysis” at IIT Madras from 11th to 16th March 2019.
  8. Attended a two-day conclave on “Climate Change Mitigation, Adaptation and Resilience” at GEC Kannur on 23rd and 24th March 2019.
  9. Attended a five-day KTU-sponsored FDP on “Recent Advances in Fuel Cells” conducted at SJCET Palai from 8th to 12th July 2019.
  10. Completed an eight-week NPTEL – AICTE FDP on “Steam and Gas Power Systems” offered by IIT Roorkee during February to April 2020.
  11. Participated in a two-day workshop on “Thermal Energy System Modelling and Optimization” conducted by VIT Chennai from 26th to 27th June 2020.
  12. Successfully completed an eight-week NPTEL – AICTE FDP on “Fundamentals of Compressible Flow” offered by IIT Guwahati from September to November 2020.
  13. Attended a five-day ATAL FDP on “Energy Engineering” conducted by IIT Roorkee from 23rd to 27th November 2020.
  14. Participated in a five-day ATAL FDP on “Computational Fluid Dynamics (CFD)” organized by LBS Kasaragod from 4th to 8th January 2021.
  15. Completed a five-day ATAL FDP on “3D Printing and Design” conducted by IIT Ropar from 1st to 5th February 2021.
  16. Attended a five-day ATAL FDP on “Novel Materials” organized by the Defence Institute of Advanced Technology from 22nd to 26th November 2021.
  17. Participated in a three-day KTU-sponsored FDP titled “Orientation Programme for NSS Program Officers” at Saint Gits College of Engineering from 16th to 18th August 2022.
  18. Participated in a three-day KTU-sponsored FDP on “Contemporary Breakthroughs in the Technologies of Industry 4.0” conducted at Vimal Jyothi Engineering College, Kannur, from 22nd to 24th August 2022.
  19. Attended a three-day FDP on “Inverse Problems in Engineering” organized by St. Thomas College of Engineering and Technology, Chengannur, from 15th to 17th September 2022.
  20. Participated in a five-day FDP on “Trends in Mechatronics and Manufacturing” held at NITTR Chennai from 14th to 18th November 2022.
  21. Attended a five-day FDP on “Computer Integrated Manufacturing” organized by NITTR Chennai from 9th to 13th January 2023.
  22. Participated in a five-day FDP on “Graphical System Design using LabVIEW” hosted by NITTR Chennai from 23rd to 28th January 2023.
  23. Attended a five-day FDP on “Trends in 3D Printing and Manufacturing” at NITTR Chennai from 11th to 15th September 2023.
  24. Attended a five-day FDP on “Non-Traditional Machining” held at NITTTR from 18th to 22nd December 2023.
  25. Attended a five-day FDP on “Emerging Green Hydrogen Energy Technologies” conducted by Lakireddy Balireddy College of Engineering from 16th to 21st December 2024.
  26. Participated in a six-day FDP on “Recent Advancements in Mechanical Engineering and its Applications” organized by Swarnandhra College of Engineering and Technology from 21st to 26th April 2025.
  1. Participated in a short three-hour online workshop on “Microsoft Office Automation” conducted by Skill Nation on 29th October 2023.
  1. Presented paper on “Energy and Exergy Analysis of Ruston Diesel Engine” at the International Conference on Advanced Trends in Engineering and Technology, organized by Vimal Jyothi Engineering College, Chemperi, Kannur on 28th March 2014.
  2. Presented paper on “Experimental Study on a Polycrystalline Silicon Solar Panel with Heat Pipe Assisted Cooling” at the National Conference on Emerging Trends in Engineering, held at Government Engineering College, Kozhikode on 29th August 2014.
  3. Presented paper on “Numerical Simulation of Liquid Jet Breakup” at the International Conference on Fluid Mechanics and Fluid Power (FMFP) held at IIT Guwahati on 9th November 2020.
  4. Presented paper on “Experimental Investigations on Heat Pipes with Phase Change Material for Thermal Management of Electronic Devices” at the International Conference on Advances in Aerospace and Energy Systems, organized by Liquid Propulsion Systems Centre (ISRO), Thiruvananthapuram from 4th to 6th April 2024.
  5. Published a book chapter titled “Design and Development of a Water-Cooled Proton Exchange Membrane Fuel Cell Stack for Domestic Applications” by Springer Nature in October 2022.
    DOI: https://doi.org/10.1007/978-981-19-4502-1_11.
  1. Received a funded project titled “Development of 10 Stack PEM Fuel Cell for Domestic Applications” during the financial year 2019–20, supported by the Agency for Non-conventional Energy and Rural Technology (ANERT) with a total grant of ₹5 lakhs.
  1. Testing of various construction materials
  1. Fluid Dynamics and Turbomachines
    Completed an eight-week NPTEL course offered by IIT Madras during August to September 2018.
  2. Steam and Gas Power Systems
    Completed an eight-week NPTEL course conducted by IIT Roorkee during February to April 2020.
  3. Fundamentals of Compressible Flow
    Successfully completed an eight-week NPTEL course by IIT Guwahati from September to November 2020.
  4. Engineering Drawing and Computer Graphics
    Successfully completed a twelve-week NPTEL course conducted by IIT Kharagpur from July to October 2022.
  5. Orientation Towards Technical Education and Curriculum Aspects
    Completed an eight-week SWAYAM course offered by NITTR from 1st October 2022 to 30th November 2023.
  6. Institutional Management & Administrative Procedures
    Completed an eight-week MOOC conducted by NITTTR from 1st October to 30th November 2023.
  7. Student Assessment and Evaluation
    Successfully completed an eight-week MOOC offered by NITTTR from 1st October to 30th November 2023.
  8. Communication Skills Modes & Knowledge Dissemination
    Completed an eight-week MOOC by NITTTR during October–November 2023.
  9. Creative Problem Solving, Innovation and Meaningful R&D
    Completed an eight-week MOOC offered by NITTTR from 1st April to 30th May 2024.
  10. Technology Enabled Learning and Life-Long Self Learning
    Participated in an eight-week MOOC conducted by NITTTR from 1st April to 30th May 2024.
  11. Instructional Planning and Delivery
    Completed an eight-week MOOC by NITTTR from 1st April to 30th May 2024.
Powered by R&D Center, Computer Science & Engineering, SJCET PALAI | Website Graphic Designer : Rinju Rajan Mathew | Wordpress Developer : Sarju S © 2024 St. Joseph's College of Engineering & Technology, Palai. All rights reserved.
FacebookInstagramLinkedinYouTubeTwitter
X